Lorenz Deepmax Z1 Detector PI System For Gold

You are here:Ana Sayfa-Metal Detectors for Hobby and Security from Top Brands-Lorenz Deepmax Z1 Detector PI System For Gold

Lorenz Deepmax Z1 Detector PI System For Gold

$7,500.00

2 adet stokta

Lorenz Deepmax Z1 Detector

 

2 adet stokta

Açıklama

Lorenz Deepmax Z1 Detector PI System Treasure Detector

Lorenz Deepmax Z1 Detector PI System Define Detector – FUNCTION

The LORENZ DEEPMAX Z1 is based on the stationary Pulse GBS (Pulse Ground Balancing System) system. Short and strong magnetic vibrations are emitted primarily by means of the detection head. These magnetic vibrations primarily create eddy currents in metal-type conductive materials. Said eddy currents will be preserved in the metal object and will disappear when the magnetic vibration emitted by the coil ceases.

It is possible to detect these eddy currents since the delayed detection phase takes place through the same detection coil (now acting as a receiver). Highly sophisticated electronic circuits are required to detect these small voltage changes and to separate these special signals from interference. In order for this signal to have an audio stage, it must be powered by a voltage-controlled oscillator (VCO), that is, when metal appears near the detection area of ​​the VCO header, it sends a signal through the headset or internal speaker.

The eddy currents generated in the metal object by the primary earth vibrations will disappear at different times depending on the conductivity of the metal object. For this reason, the classification circuit gives noticeable delays in the eddy current readings taken over the unit time. In addition, with the Double D header, it is possible to detect any metal or non-metal mine. This gives more information about the probable type of matter, moreover, makes it easier to locate and size the buried metal object thanks to the emitted sound.

ADVANTAGES

In principle, the Pulse GBS system has the advantages of using a large diameter head and high transmission power. These are especially necessary for deep detections. Cable coils of different sizes and shapes attached to the frame can be connected to the LORENZ DEEPMAX Z1 without any adjustment. A special adaptation circuit has been added to the detector, which will automatically adapt to different coil systems.

This provides extraordinary depth capability when connected with any coil. The larger the diameter of the searchcoil, the greater the sensitivity to large objects. Also, smaller objects will be detected with less precision. This feature is preferred for detecting large objects and ignoring small objects.

Large headers offer high-range detection. Even in difficult terrains where magnetic iron oxidation occurs, the LORENZ DEEPMAX Z1 will offer exceptional depth capability for both iron and other non-ferrous metals (gold, silver, copper, etc.) when the Ground Balance System is used. It decreases the depth in determinations.

Soil Types

With the LORENZ DEEPMAX Z1 , objects of almost the same depth can be detected in almost all soil types or in “air tests”. The high sensitivity of the DEEPMAX Z1 against non-ferrous metals such as gold, silver and copper, new target analysis and many different detection functions make the device superior. DEEPMAX Z1 gives a visual signal on the screen (LCD) for each mine detected.

The detector gives numbers between 000-099, depending on the delay caused by the reading, and the metal is classified accordingly. The target classification circuitry is in some cases affected by the size of the metal object, so it may identify small coins as large pieces of metal.

LORENZ DEEPMAX Z1 also offers target analysis for more sophisticated and purified ferrous and other non-ferrous mines with 26 cm and 35 cm DD coils in difficult soil conditions. The detector also gives an audible warning via headphones or speakers. According to depth detection tests (air tests), the results are almost identical to many types of soils and therefore significantly higher probability results are obtained compared to standard pulse induction or sine wave type VLF-TR detectors.

Lorenz Deepmax Z1 Detector PI System Treasure Detector – APPLICATIONS

DEEPMAX Z1 was developed for professional detection and detection applications.
Many different searchcoils can be connected to this metal detector. Large areas can be scanned efficiently with frame coils. Saltwater, different soil types, or changes in air temperature may have little effect on the DEEPMAX Z1’s detection range. You can separate unwanted nail or foil-type objects or introduce them as unwanted small objects, so you can focus on larger and deeper objects. When connected with the small search coils, the DEEPMAX Z1 is an excellent tool for detecting small objects deep down.

LORENZ DEEPMAX Z1 Standard Detector Set

DEEPMAX Z1 main unit, carrying case, rechargeable external NiMH battery 12V9,5Ah, shoulder-belt strap, fast charger (100-240VAC), Euro AC- mains cable, headset, user manual, carrying strap and bag 1m x 35cm double D header with 1m frame head and 3 telescopic S-pole rods.

Lorenz Z1 DeepMax TECHNICAL SPECIFICATIONS

  • DEEPMAX Z1 has been developed to provide features such as high precision and stability, as well as easy handling. Thanks to these features, the control menu of the device has been simplified and the factory settings of the device guarantee the best results in its field.
  • High sensitivity to all types of metal
  • Stable operation on mineralized ground or salt water thanks to the Vibrating Ground Balancing System (Pulse Ground Balancing System – Pulse GBS)
  • Reliable and simple operation thanks to a few control keys and a custom LCD display
  • Pinpoint target detection with large coils
  • Very easy and effective detection over a large area
  • Robust and slim mechanical design that protects from water and dust
  • Alternative search coils for different types of detections
  • Automatic adaptation for different sizes of coils and head designs suitable for different sizes
  • Small unwanted metal objects can be identified or separated.

Other Technical Features

  • Instant voice response with different volume adjustments
  • Logarithmic audio response and intense bar graph reading for easy pinpointing
  • Battery check with audible alarm warning
  • Laser guided target tracking by reading visual conductivity and delay time
  • Enhanced metal release for ferrous and non-ferrous metals
  • Fully adjustable volume-threshold feature
  • Acoustic and visual response
  • Waterproof search coils
  • Rechargeable NiMH battery for worldwide use, also known as dry cell
  • Fast charger 90-265V AC / 50-60Hz for worldwide use
  • 10-30V DC car chargers are available as accessories
  • Frequency and Filter function for low frequency EMI interference eliminator
  • Automatic return to old soil calibration
  • Different delay and sensitivity settings for separating small objects or locating
  • Depth penetration pushing the boundaries for very large objects
  • Expert on gold, as well as improved detection range proven on low conductive metals
  • Low frequency interference elimination circuitry for less obstructions in urban areas

Lorenz Z1 Deep Search Detector

  • High dynamic range for outstanding ground signals and easy locating
  • Best performance for locating non-ferrous metals or small objects such as coins and coins
  • Mono or DD, induction balanced or target locating coils can be used
  • Multiple Sensor Motion Detection (MST) for several different searchcoils that can work simultaneously without interfering with each other
  • Easy-to-use data recording function with the hardware and software kit added to create 6 2D images and 6 3D surface maps from the detections made. Each map is different depending on the electronic analysis method and can therefore be key information about the type of buried metal object.
  • GPS based meter, Tracking, Field and Compass Heading information, easy data recording and operation
  • New detection circuitry with all new functions
  • Signal strength bar graph, delayed time reading, ferrous and non-ferrous metals (gold, silver, copper, etc.), battery status and setting options of all modes are simultaneously displayed on a large LCD screen.

Detection Depths

  • Mine type / search coil
  • 35 cm DD coil
  • 45 cm coil
  • 1 x 1m pair
  • Gold nugget diameter = 0.5 cm
  • 28 cm
  • 30 cm(X)
  • X
  • X

Silver

  • diameter = 2.5 cm
  • 50 cm
  • 55 cm
  • 50 cm (X)
  • X

Brass Sheet

  • 10 x 10 cm
  • 100 cm
  • 110 cm
  • 145 cm
  • 170 cm

Tin Can (Cola etc.)

  • 0,33 l
  • 120 cm
  • 130 cm
  • 165 cm
  • 200 cm

Iron box

  • 30 x 18 x 15 cm
  • 170 cm
  • 200 cm
  • 280 cm
  • 340 cm

Producer Company data.

X: Out of searchcoil range

Detection depths were recorded using the air environment;

DELAY4/GND4, SENS5

Detection depths may differ depending on different ground or delay detection settings. Detection of much higher depths can be expected with larger metal objects.

Sold as optional accessory

Lorenz Z1 Data Logger Surfer 11 software is only a feature of the Lorenz Z1 series. After field data is collected, the Surfer 11 software easily and accurately converts the data stored on the USB Stick into color maps, contour, surface, image or vector maps on the computer within minutes.

Therefore, an additional Scripter Software automatically generates twelve maps in each area, six of which are two-dimensional and six of which are three-dimensional. Thus, the operator can choose between different separation and mapping methods. The new Data Logger Hardware and Software developed by Lorenz Detecting Systems primarily offer ease of use, extremely precise operation and economical.

With just a few control knobs, Lorenz Z1 data collection becomes enjoyable for both beginners and professionals such as engineers, geologists, archaeologists, scientists and many more. Users often search for spilled waste, meteorites, detonated munitions or lost aircraft. Operator is not confused for functions.
All Deep Treasure Detectors Are Here

For More:  Google

[toggle title = “Detector or Underground Imaging Device Purchase Information” state = “close”]

Informative Text To Know Before Buying A Detector For All Our Products

In addition to being an enjoyable hobby, searching for gold in treasure hunting involves some technical issues. If you are going to buy a device to search for treasure; Ask your dealer about the warranty status of the detector brand you are going to buy.

Then, when you determine your own search area of ​​the detector you will buy, get information about its suitability for the land or region conditions. Do not buy a detector without researching depth.

In today’s technology, every detector has features of depth, durability and ease of use. For deep searches, primarily underground imaging devices should be provided, not detectors .

If you are using any  underground imaging device or field scanning device , you should definitely use a treasure detector , gold detector or metal detector for the separation of the precious metal you are looking for .

Because underground imaging devices are used to detect rooms, cellars, voids or water areas; The detector is used to detect the precious metal inside.

The most preferred detectors in treasure hunting are surface search detectors. Deep Search Detector is mainly used to find deeper treasures.

Do not decide on your Deep Detector preferences without consulting us. Our expert engineerswill recommendyou the best detector . Detector for sale or rent detector in the right place you are looking for.

Marka

Lorenz Detector

Ek bilgi

Ağırlık 10 kg
Boyutlar 180 × 250 × 55 cm

İncelemeler

Henüz inceleme yapılmadı.

“Lorenz Deepmax Z1 Detector PI System For Gold” için yorum yapan ilk kişi siz olun

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Go to Top